Hearst UK is the trading name of the National Magazine Company Ltd, 30 Panton Street, Leicester Square, London, SW1Y 4AJ. As I had checked it was perfectly mounted I then adjusted the TV back to the wall and ensured it was aligned by using a spirit level (I have a tradesman one) on top of the TV edge. But if your experienced (like me, I hate blowing my own trumpet,ha) it takes forty five minutes tops! The Invision bracket boasts an ultra slim wall and long reach attribute, which gives you a 58mm protrusion when fully closed against the wall and a 500mm extension at its longest reach.

The biggest is that doing so requires more effort than just popping on the feet and setting it on a cabinet. So I was now stuck with a bracket half attached to the wall, with four bolts I could not risk undoing, and two others that were not held in properly. The horizontal centre line of the TV should be level with, or slightly above, your eyeline when you're in your normal seated location. Thinking back I’ve fitted the bracket to three curved TV’s and it was as straight forward as for a flat TV, but I do remember having to use the suptek kit because I need longer spacers for the vesa rails.The best part is once you have fitted the tv to the bracket and to the wall you can move the tv if it is not level as it has a centre pivot that allows you to move the tv so it looks level to every thing else I can recommend this item highly. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). The final steps adjusting and tightening swivel screws and the anchors is fiddly with the smaller nuts and bolts difficult to get at behind the tv and close to a wall. I now purchase this Suptek universal TV installation kit just in case I ever end up hanging a Samsung TV again.

It can be mounted on solid concrete walls, brick walls or solid wood stud walls (do NOT mount or install the product on plaster walls, cavity walls, drywall or soft walls). com Limited is an Introducer Appointed Representative of CarMoney Limited who are authorised and regulated by the Financial Conduct Authority, FRN 674094. Some keep the telly in a fixed position, while others let you swivel, tilt or turn it within 180 degrees. So the only way to deal with this is to use a TV bracket that extends away from the wall, at least 500mm (half a metre). Space Saving- This TV wall bracket 65 inch can retract down to 65mm from the wall and extend to a maximum of 390mm away from the wall, saving you valuable space.

I trashed the two loose rawplugs with cutters, and managed to get them out of the wall (remember, the bracket was partially bolted to the wall, so I couldn't just pull them straight out of the wall as the bracket was in the way). The niggle being that you have to use a spirit level every time you move the TV or clean the screen. Whether in a bedroom, living room or kitchen your TV bracket saves space whilst giving you a great viewing angle. Once you've worked out which bolts to use, bolt the front half of the bracket onto the back of your TV. Sure, you don’t get the manoeuvrability of some of the other models above, but this is a sturdy and no-fuss wall mount for anyone who wants to replace some open wall space with a massive 4K screen.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. A huge majority of TV mounting brackets come with a poor selection of M8 bolts, and the Invision bracket is no exception. It turns out, that once you have screwed your coackbolt into the supplied rawplugs, they *really* do not want to come out. The HDTV-DXL comes with the full Invision Compatibility Promise ensuring that you can use your TV bracket for Samsung, Sharp, Sony Panasonic, Toshiba, LG, Philips, JVC, Hinsense and TCL TVs. Up and down tilt is set and fixed and changing it afterwards is much less straightforward, so make sure you have it how you want it when you first put it up.You see plasterboard fixings are based on handling a downward force, once the TV bracket is pulled away from the wall a outward force is then added to the stress on the fixings. With the vertical bars now bolted and spaced to the back of your TV, now you can fully tighten the vertical bars onto the horizontal bars on the front half of the rack. Manufactured with cold-rolled steel, giving you the confidence that your TV is safe and secure whilst mounted to the wall.

I did not take up the offer of an replacement part on the last bracket either as the TV bracket is so solid without the other screw holding it anyway. EXPERIENCE BETTER – Here at Invision Technology we have been designing screen mounting solutions in the UK for over 10 years and we go to great lengths to make the whole process of choosing your bracket and mounting your TV as easy as possible.For some reason, while I was reading the reviews, alot of people were complaining that the instructions didn’t tell you to remove the TV mounting plate before assembly. Includes a selection of M4, M5, M6 and M8 TV mounting screws with 6 wall fixtures for wood and masonry. Route TV cables along arms of bracket, leaving slack around joints and clip on the cable management covers – see diagram ‘H’.